Results 1 to 3 of 3

Thread: Possible crack for 2.0?

                  
   
  1. #1
    DCEmu Rookie Terial's Avatar
    Join Date
    Apr 2005
    Posts
    108
    Rep Power
    71

    Exclamation Possible crack for 2.0?

    An idea came to me just now as i was driving home. And i'm going out on a limb here and assuming a few things.

    NOTE: FIRMWARE and firmware are capitilazed differently to indicate a difference between firmware software and actual FIRMWARE stored on the PSP's hardware.

    On firmware version 1.0, on the PSP's FIRMWARE, there is a file/code that launches EBOOTs off the memory stick w/o verifying it's authentication. we'll call this the 1.0CA F/C (1.0 Code Activation File/Code)

    On firmware version 2.0, on the PSP's FIRMWARE, is stored a file/code that launches EBOOTs off the memory stick and verifies that it is digitally signed by sony before fully loading said EBOOTs. we'll call this the 2.0CA F/C.

    Well, I know there is a virus out there that flashes the PSP's FIRMWARE (the actual FIRMWARE, the memory stored on the PSP's hardware) and then cuts the power off in the middle of the flashing, and corrupts the data, so it's possible to flash the firmware w/ code.

    WELLLLLLL, how about flashing the FIRMWARE chip that contains the 2.0CA F/C on a 2.0 PSP, with the same files stored on that chip, only replacing the 2.0CA F/C with the 1.0CA F/C?

    This may not work for 3 reasons that i can think of,

    1. Kernel mode may be needed to flash the FIRMWARE.

    2. The file/code (if there is any, im sure there is) that launches said 2.0CA F/C will not launch the 1.0CA F/C.

    3. I'm a complete dumbass when it comes to this, lol.


    well, with problem no. 1, .... Fanjita needs to get kernel mode running in order to make this work!

    problem 2. Simply replace the file/code that launches the 2.0CA F/C with the file/code from 1.0 that launches the 1.0CA F/C. using the method above except concerning the FIRMWARE chips/code/files that have the 2.0CA F/C launching data on them.

    and no.3, there's no fix for that



    Maybe someone can make this work? It WON'T be me, lol. but if anyone does actually do it... could ya... idk credit me? rofl, like it would actually work.

    2.5 may be supported by this too if homebrew can be exploited anytime soon.

    Any comments? shooting down my hopes? praise? murder? laughs? anything would be appreciated excluding flames! but... just in case... *puts on flame retartant suit* go ahead!

  2. #2
    DCEmu Old Pro xuphorz's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Age
    36
    Posts
    1,193
    Rep Power
    75

    Default

    not possible, i asked a similar questrion downgrading 1.50 to 1.00 back a while ago (when 1.0 was the only one that could run emu's)
    everyone back then said no, so i'd expect the same with this version swap

  3. #3
    DCEmu Rookie Terial's Avatar
    Join Date
    Apr 2005
    Posts
    108
    Rep Power
    71

    Default

    BAH! *headesk*

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •